Product
Tech Spec
Downloads

 

Introducing the All New DK T7M++

Configure Your Audio Meter the Way YOU Like It!

DK  T7M++ puts the possibilities back in your hands

We proudly present our new concept where you create and built your analyzer with the functionalities you want installed in the device. The concept is based on the new hardware platform DK T7M++ with unlimited possibilities and you select from a wide variety of software applications which has to be installed and still we shall provide you with the same high quality as you already know from our product range. 

What we offer is the new hardware DK T7M++ platform both as a desktop version and a rack mount version for a low entry price where you will be able to create the unit to your needs and even if you do not purchase all the software applications immediately, you can always add more to the unit later on without purchasing more hardware.

We have created a wide range of software applications from which you can purchase functionalities to installed right away providing the opportunities which are ideal for you and your workflow on a daily basis. Simply add functionalities on the fly when your requirements call for it.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

First choose your DK T7M++. A desk mounted or rack mounted version is available. Next choose at least one Input Option.

  • Analogue I/O
  • AES I/O
  • SDI I/O

Now you are up and running! Have a look below at what other Options are available to make your DK T7M++ just right for your metering needs.

 

 

Select from a Wide Range of Options for the DK T7M++


Analogue I/O

2 x Analogue Input and Headphone Out

Connect your analogue signals to the XLR connectors on the breakout cable.

 

Part No. ANALOGUE OPTION

 

bnc cables2

AES I/O

4 x AES Input and 4 x AES Output

Connect up to 8 digital channels to the BNC connectors on the back of the DK T7M++.

 

Part No. AES OPTION

 

SDI

SDI

1 x SD/HD/3G Input and 1 x Reclocked Output with up to 16 Deembedded Channels. Picture Preview Included.

Be sure that you are monitoring the correct SDI feed. The
Picture Preview feature allows you to check the incoming SD, HD or 3G SDI picture in an instant.
By the push of a button DK T7 instantly turns into a mini video confidence monitor along side the on-going metering.

 

Part No. SDI OPTION

 

madi1

MADI

Multichannel Audio Digital Interface

With the implementation of MADI, or AES10, in the DK T7M++, you’ll be able to receive up to 64 channels of Audio with sampling rates of up to 48 kHz.

Available Q4 2016.

 

Part No. MADI

 

ravenna

 

 


Ravenna

Open Audio over IP

RAVENNA is an open solution for transmitting audio over IP. Designed to meet the exacting standards of the Broadcast industry, RAVENNA delivers high-quality, multi-channel audio over a standard IT network.

Available Q2 2017.

 

Part No. RAVENNA

 

ram

Memory Extended

Ultrafast Pipeline Memory

Required for the Waveform Monitor Basic Option and Waveform Monitor Extended Option.

 

Part No. MEMORY EXTENDED

 

waveform1

Waveform Monitor Basic

Basic Waveform Monitoring. Including RGB, Luminance, Chrominance and Vectorscope. Preset Fixed.

The WFM T7 delivers ultra fast and high resolution Waveform
monitoring. On top of this it includes the DK T7 Audio & Loudness
engine for simultaneous Video and Audio metering – Literally the best of both worlds . . .
Every TV and Post Production editing suite realizes the need for
monitoring both video and audio quality parameters during every
day production. The application calls for a simple and easy to operate solution that delivers instant overview of the relevant
video and audio parameters and results – WFM T7 is just that!
The WFM T7 combines the best of both worlds, by bringing
together every day Waveform Monitoring and Audio|Loudness
displays in a tight cooperation forming the ultimate working tool.

Requires the SDI Option and the Memory Extended Option.

 

Part No. WAVEFORM BASIC

 

waveform2

Waveform Monitor Extended

Eye Width and Jitter. Line Select, Format Analysis and Gamut Alarm. Timing Measurement. User Presets.

All SDI capable DK Meters feature the Eye Width Parameter as default feature. Inspired by cell phone reception indication, Eye Width expresses the immediate quality of the incoming SDI signal and allows you to constantly monitor this to avoid any drop outs and instabilities.

Requires the SDI Option, Waveform Monitor Basic Option, and the Memory Extended Option.

 

Part No. WAVEFORM EXTENDED

 

clapboard

LipSync

Video to Audio Delay Measurement including Android App.

Getting your video stream and audio stream through different
paths? Get an instant measurement of the time difference.

The LipSync application will measure the actual timing difference between the audio and the video signal at the broadcast station or any given point in the signal chain.

 

Part No. LIPSYNC

 

 7.1 StarFish

StarFish Surround 5.1, 7.1

Multichannel Surround Sound Display 5.1 to 7.1, Downmix

No matter if you are Surround or Stereo, DK T7 gives you instant inter-channel views.
DK-Technologies’ well-known channel and phase tools, JellyFish® and StarFish® gives you the detailed graphical representation of each channel amplitude and phase relationship, making it perfect for balancing out your stereo or surround mix as well as, spotting potential problems and errors in your signal.

 

Part No. STARFISH

 

atmos

Dolby Atmos Surround Sound

Dolby Atmos adds an overhead dimension

Be ready for the new surround sound technology from Dolby. With up to 64 speakers, Dolby Atmos brings overhead speakers to the cinema sound systems.

Available Q1 2017.

 

Part No. ATMOS

 

DK T7 MultiLoudness

Loudness Extended

Four Simultaneous Loudness Sets

With several sets of audio, the Loudness Option will give you up to 4 simultaneous Loudness Bargraphs and Measurements.

 

Part No. LOUDNESS++

 

FFT II

Spectrum Analyzer

Magnitude vs. Frequency

The FFT view, simply features a 1024 band FFT Spectrum Analyzer. The FFT analyzer may be used to check the spectral content of individual channels in great detail. This allows to check for unwanted noise signals high and low, as well as review the spectral balance of your source signal.

The FFT features detailed cursor and zoom functions allowing ultra high precision spectral review.

 

Part No. FFT

 

 DKT7 Loudness Automation

Loudness Automation

Workflow Optimizer for Loudness Post Production.

Requires the Time Module for SMTPE Decoding.

As the only Loudness meter in the world, DK T7 features the
unique ability to automate the loudness data and instantly
recalculate the Loudness results after editing smaller sections of a
given audio file.
By feeding DK T7 timecode during a loudness tracking session,
DK T7 will remember Loudness data of up to 4 hours back in time
and any edit performed will instantly calculated into the overall
Loudness result rendering an immediate Loudness reading, rather
than having to spend time on tedious re-runs of the entire audio
file as with competitive meters.
The above clip shows how editing a few seconds of a complete
audio file, will normally force you to playback the entire file to remeasure the complete loudness results.
With Loudness Automation you will simply play the edited audio
section and the DK T7 will instantly show you the resulting
Loudness Result for the entire audio file.

 

Part No. AUTOMATION

 

ntp

Time Module

SMPTE Decoder, RTC, NTP Time, HANC Time.

Required for Loudness Automation.

 

Part No. TIME

 

routing

Audio Extended

Flexible I/O Routing. Tone Generator. HDMI Audio Output.

Enhance your metering with the Audio Extended Option. With flexible I/O routing, you can route any input to any desired output. SDI IN channel 3 to AES OUT channel 5? No Problem.
The Tone Generator will give you a lot of different test pattern for your setup. Sine, Pulse, EBU, etc.
The HDMI output is not limited to a role as only external monitor. Route any input to the 8 channels of the HDMI output.

 

Part No. AUDIO EXTENDED

 

Charts

Advanced Logging Option

Enables the Advanced 100ms Loudness Logging on the Ethernet for Offline Analysis.

The Logging Application may be tailored to start and stop by specific time-code slots.

This in turn, means that you can completely automate your Loudness and Peak Logging, removing to ‘punch in & out’ during logging sessions.

Available Q2 2017.

 

Part No. LOGGING EXTENDED

 

clapboard align

LipSync Auto Align

TBA

 

Part No. LIPSYNC ALIGN

 

 earth network

Network Option

Enables the Use of the Ethernet Port.

 

 

Part No. NETWORK

 

Related Products

Technical Specification

Coming Soon

Product Information

Coming Soon

Support & Service

Coming Soon